Kenwood KAC-9106D Class-D Monoblock Subwoofer Amplifier
Kenwood KAC-9106D Class-D Monoblock Subwoofer Amplifier
Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood’s Performance Series KAC-9106D amplifier, you’ll hear all the great tonal color, impact, and detail in your music’s bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.
Connections
Power Connections: The power and ground connections are 0.55″ wide screw terminals. The remote turn-on screw terminal is 0.335″ wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.
Speaker Outputs: There are two pair of 0.335″ wide screw terminal speaker outputs; they are internally wired in parallel, making it easy to connect two subwoofers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.
Controls
Gain: To accommodate the varying range of signal levels from today’s factory and aftermarket radios, the KAC-9106D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level.
Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged.
Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.
Specifications
Rated Input Power: 4 ohms 500W x 1, 2 ohms 1000W x 1
Signal to Noise Ratio: 100 dB
Low Pass Filter: 50 – 200 Hz (-24 dB / oct.)
Infrasonic Filter: 20 – 50 Hz (-24 dB / oct.)
Bass Boost: 40 Hz (0 – +18 dB)
Size(inch): (W)13-3/16″ x (H)2-3/16″ x (D)7-9/16″
Weight(lbs): 6.2
